5:
Take Bolt Cover Block B. Place 2 No 4 x 30 Gold Screws into the marker points and align this with the rear edge of the lower
LEFT Panel. Look through the hole and check a bolt can go through the T Nut and come out of the hole! Fix this block in place
ensuring it is flush with the side panel all around. Take Bolt Cover Block C. Place 2 No 4 x 30 Gold Screws into the marker points.
Align this with the folding join on the LEFT side panel and place OVER the 3 T nuts in a row. Ensure bolts can penetrate through
the T nuts and come out the holes! Fix ensuring the block is flush all around.
6:
Take Bolt Cover Block F. Place 2 No 4 x 30 Gold Screws into the marker points and align the block between the slots at the
front of the trainer on the LEFT side panel. Ensure the bolt can penetrate the T Nut and come out of the hole! Fix the Block
ensuring it is flush all around.
7:
Take Block T and place a T Nut in the pocket. Secure this with 2 x Small Screws. You do NOT need to loosen the screws on this
T Nut!