MRD 6000
– User Manual
Page 97 (112)
SDI Standards:
Ports 1A, 1B, 2 -
3G-SDI
– 3.0 Gb/s
HD-SDI
– 1.5 Gb/s
Ports 3, 4
–
SD-SDI
– 270Mb/s
Note: When outputting 4K format (Two Sample
Interleave) the Simultaneous Output is a 1080p format
of the 4K mode
on port 1B
Connector:
75
Ω Female BNC
Return Loss:
≥15 dB, 5Mhz to 1.5GHz
Drive Level:
800 mVpp ±10%
Data Bit Rate:
SD-SDI
– 270Mb/s
Display Modes:
16x9
– Pillar-box, Center-Cut, Anamorphic
4x3
– Letterbox, Center-Cut, Anamorphic
Composite Video Out
–
Video Format Standards:
SMPTE 170M-2004, NTSC, PAL-B/G/I/D/M/N
Connector:
Return Loss:
One 75 Ω ±10% Female BNC (CVBS)
>25dB, 0 to 6.00 MHz
Frequency Response:
Drive Level:
Chroma/Luma Delay:
Field Time Distortion:
Line Time Distortion:
Short Time Distortion:
Differential Gain:
Differential Phase:
Signal to Noise Ratio:
K factor
± 0.7dB From 0 to 4.00MHz
140 IRE (1.0Vpp), ±2 IRE
±26 ns Max
< 2% (± 3 IRE)
< 1% (± 1 IRE)
< 2% (± 3 IRE)
< 4%
< 1.5° degrees
≥55dB luminance weighted
< 2.5%
Digital Video Out
–
Digital Video Standard:
SDA-HDMI-OM-E Rev A
Connector:
HDMI-type Female Type-A
Audio Decoding Features
Number of Audio Services:
Base Unit
–
2 Audio Services
4 Audio Service Decode License (MRD 66840) Adds
–
2 Audio Services (4 total)
Audio Codecs Supported:
Dolby Digital (AC-3) & Plus (EAC-3) AAC-LC, HE-
AAC, & HE-AACv2
MPEG1L2 & MPEG2L2
Output Formats:
Digital Pass-through
PCM (Decoded Discrete channels for 5.1 sources or
Downmixed for 5.1 Sources)
Analog (Decoded Discrete channels for 5.1 sources or
Downmixed for 5.1 Sources)
