MRD 6000
– User Manual
Page 50 (112)
Setting
Range
Description
On Backup
Use Primary PIDs
Use Backup PIDs
Sets the PIDs the MRD 6000 will tune to in
case of an input failover.
If Use Primary
PIDs
is selected the MRD 6000 will tune to
the PIDs specified in the Primary PID
column. If
Use Backup PIDs
is selected the
service name specified in the Backup PID
column will be tuned.
Auto Seek Mode
In Auto Seek mode the MRD decodes the first service listed in the PAT. All PIDs in this
service are automatically selected for decoding. No other configurations are available in
this mode. This mode is recommended to verify the MRD is receiving a valid signal and
is able to decode. This mode is not recommended for a professional environment as
changes in the PAT’s listings and order of listings can unexpectedly cause changes the
service being decoded.
Auto Seek Menu
