EN-1
Installation
Test
Negative
Open the packaging, remove the battery insulation foil and close the battery
compartment.
Please make sure that the negative pole of the battery is facing upwards and the
positive pole of the battery downwards.
Sticking
on
Take out the supplied double-sided adhesive tape, remove the sticker from one
side and stick it correctly on to the bottom surface of the transmitter.
Installation
Always check that you have good signal reception from your chosen location.
Every structural obstacle reduces the effective range between the doorbell and
the doorbell button.
When installing the doorbell button outdoors, locate it in such a location where
it will not be permanently rained on. Suitable is a recess in a pole or a similar
location. Never locate it inside a metal cover. We recommend smooth and dust-
free surfaces.
Clean the respective area (button installation area), remove the sticker on the
other side of the adhesive tape and stick it on to this area. Push the transmitter
down firmly to ensure secure adhesion.
Summary of Contents for SWD R130
Page 2: ......
