EN-3
Setting the learning code
1. Delete the prior code:
Because pairing is already set by the manufacturer, this task is only necessary
for repair in the event that the learning code is lost.
If you need to delete the codes, please hold down concurrently the volume
setting button
and music selection button
for three second.
2. Enter the new code:
Hold down the music setting button
for three seconds to activate the
learning mode - the LED indicator on the receiver will start to flash.
When the bell button on the transmitter is pressed, the LED indicator will stop
flashing, i.e. learning is successfully completed.
LED indicator
Music selection
Volume setting
Receiver parameters
Category
Parameters and
description
Notes
Power consumption
< 0.5 W
Stand-by mode
Sensitivity
< -105 dBm
Built-in highly sensitive
chip
Power source
AC (alternating current)
110 - 240 V/50 - 60 Hz
The power adapter is
designed for a wide
range of input voltages
(the DC receiver uses
batteries)
Decoding
Microprocessor
Effectively prevents
malfunctions
Coding
Automatic code learning
Simple controls
Bell melodies
36 musical Hi-Fi sounds
(accords)
Pleasant tone
Transmission range
Up to 150 metres
Open space without
obstacles and
electromagnetic
interference
Button
Induction touch sensors
No physical buttons
Summary of Contents for SWD R130
Page 2: ......
