EN-2
The button may also be permanently mounted using screws. Pre-marked screw
holes are located on the inside of the cover. These can be used if you wish to
permanently install the doorbell button. It is necessary to seal the holes under the
screw head so that water does not enter through them.
Information about placing a name tag on the button: Use an alcohol-based
marker. If you use a sticker, never apply it over the bell icon.
Power supply
AC
Connect the AC receiver directly to a mains power outlet. The area around the
power socket must remain uncovered and freely accessible.
Description of function
Touch the music selection button
and select your favourite chime tone. There
are 36 melodies available.
Touch the volume setting button
and set the volume level. There are 4 levels
available.
High volume, medium volume, low volume, mute.
Select mute when you are busy and do not wish to be interrupted.
Melody selection
Volume setting
When the doorbell is chiming, the LED indicator is lit; when the chiming stops the
LED indicator turns off.
The frequency of the light corresponds to the speed of the melody. With a fast
melody the light flashes quickly; with a slow melody the light flashes slowly.
Summary of Contents for SWD R130
Page 2: ......
