Sencor SAC 1811CH, User Manual

Page: 9 / 28

Wall Mounted Split Air Conditioner
SAC 1811CH / SAC 2411CH
EN
EN-9
02/2015 Copyright © 2015, Fast ČR, a.s.
AUTOMATIC TIMER CONTROLLED ON/OFF OPERATION
Setting the AUTOMATIC TIMER CONTROLLED ON/OFF OPERATION mode
1. Setting up the automatic shut off mode
First check that the air conditioning device is on. Press the TIMER button to activate the automatic
shut off settings. “1 hour” will appear on the display. Each time the TIMER button is pressed the
automatic shut off time is extended by 1 hour (up to a maximum of 24 hours). The set time will be
shown on the display. The time remaining until the automatic shut off is updated on the display
every hour. Once the set time has elapsed the air conditioning device will shut itself off.
Note :
If you wish to end the automatic shut off function, repeatedly press the TIMER button until
"24 hours" appears on the display and then once more to end this function.
2. Setting up the automatic start function (delayed start)
First check that the air conditioning device is off. Press the TIMER button to activate the automatic
start settings. “1 hour” will appear on the display. Each time the TIMER button is pressed the
automatic start time is extended by 1 hour (up to a maximum of 24 hours). The set time will be
shown on the display. The time remaining until the automatic start is updated on the display every
hour. Once the set time has elapsed the air conditioning device will turn itself on.
Note :
If you wish to end the automatic start function, repeatedly press the TIMER button until
"24 hours" appears on the display and then once more to end this function.
Cancelling the AUTOMATIC TIMER CONTROLLED ON/OFF OPERATION mode
The automatic start/shut off can be cancelled in two ways:
1. Repeatedly press the TIMER button until “24 hours” appears on the display and then once more to
end the timer setting. The time information on the display will turn off.
2. Press the CANCEL button at any time to cancel the timer setting. The time information on the
display will turn off.
Note :
After an electrical power outage it is necessary to setup the AUTOMATIC START/SHUT DOWN
mode again.
If you set the time for the AUTOMATIC START/SHUT DOWN and you wish to change this time, it
is necessary to cancel the previous START/SHUT DOWN setting and to set a new time.
If you set the time of the AUTOMATIC START/SHUT DOWN and then accidentally press the TIMER
button, the timer will start to countdown the time again based on the time shown on the display
at the time.