![Sencor SAC 1811CH User Manual Download Page 23](http://html1.mh-extra.com/html/sencor/sac-1811ch/sac-1811ch_user-manual_1238479023.webp)
Wall Mounted Split Air Conditioner
SAC 1811CH / SAC 2411CH
EN
EN-23
02/2015
Copyright © 2015, Fast ČR, a.s.
3. Range of operating temperatures:
Maximum cooling
Minimum cooling
Maximum heating Minimum heating
Inside DT/WT (°C) 32/23
21/15
27/--
20/--
Outdoors DT/WT
(°C)
43/26
21/15
24/18
–5/–6
4. The electrical installation wiring diagram of the air conditioning device (for the indoor/
outdoor units) is supplied with the device.
5. If the power cord is damaged, please contact a service technician or a qualified person,
otherwise there is a risk of injury.
INSTALLATION INSTRUCTIONS
1. Locating the indoor unit
•
The air inlet and outlet must not be blocked.
•
Adhere to the maximum height difference between the indoor and outdoor unit – see
Technical parameters.
•
Install the indoor unit on a rigid wall, which can bear the weight of the unit and will not be
vibrated by the unit.
•
The unit must not be in direct sunlight.
•
Select a location for simple draining of the condensation water and for connection to the
outdoor unit.
•
Make sure that light bulbs do not cause interference to the signal transmitted from the remote
control.
•
The minimum distance between the air conditioning device and a television, radio or another
home appliance is 1 m.
2. Locating the outdoor unit
•
Select a location, which can bear the weight of the unit and will not be vibrated by the unit.
•
Select a location with good ventilation and low dust level, out of direct sunlight and protected
from the rain.
•
Select a location where the air emitted by the outdoor unit or its operating noise level will not
disturb your neighbours.
•
There must not be any obstacles in the vicinity of the outdoor unit.
•
Avoid locations where flammable gas leaks could occur.