EN-10
EN
Wall Mounted Split Air Conditioner
SAC 1811CH / SAC 2411CH
02/2015
Copyright © 2015, Fast ČR, a.s.
SETTING THE OPERATING MODE
1. AUTO mode (automatic mode)
In this mode the air conditioner automatically adjusts the temperature setting to achieve the most
optimal room temperature. After being turned on, the air conditioner will automatically select an
operating mode based on the room temperature. The following table shows the conditions set
when put into operation.
Room
temperature (RT)
Air conditioning unit
without a heat pump
Air conditioning unit
with a heat pump
Mode
Default
temperature
setting
Mode
Default
temperature
setting
RT ≥ 26 °C
COOL (cooling)
24 °C
COOL (cooling)
24 °C
26 °C > RT ≥ 25 °C
RT – 2 °C
RT – 2 °C
25 °C > RT ≥ 23 °C
DRY (drying)
RT – 2 °C
DRY (drying)
RT – 2 °C
RT < 23 °C
21 °C
HEAT (heating)
26 °C
2. COOL mode (cooling)
Press the MANUAL or SWING button to change the vertical air flow direction (up/down).
Press the FAN SPEED button to change the speed of the indoor unit.
Press the temperature setting button to change the temperature setting.
3. DRY mode (drying)
In this mode the air conditioner automatically sets the room temperature, the set room temperature
is not shown on the display.
The temperature settings and FAN SPEED buttons are disabled.
Press the MANUAL or SWING button to change the vertical air flow direction (up/down).
4. FAN mode (fan)
In this mode the outdoor unit is not turned on. Only the fan inside the indoor unit operates.
Press the MANUAL or SWING button to change the vertical air flow direction (up/down).
Press the FAN SPEED button to change the speed of the indoor unit.
5. HEAT mode (heating) – only for air conditioning devices with a heat pump
Press the MANUAL or SWING button to change the vertical air flow direction (up/down).
Press the FAN SPEED button to change the speed of the indoor unit.
Press the temperature setting button to change the temperature setting.
6. TURBO function
This function makes it possible to increase the cooling or heating power (only on models with
a heat pump). If the air conditioning unit is running in the cooling or heating mode, press the
TURBO button to activate this function. The symbol will appear on the display of the remote
control. The fan speed is controlled automatically. The air conditioning unit cannot be controlled.
Press the TURBO button again to turn off this function. After the TURBO function is ended, the fan
is set to a low speed.
Note
:
The TURBO function can only be activated in the cooling or heating mode.
The use of the TURBO mode increases the noise level of the air conditioning unit.
