Wall Mounted Split Air Conditioner
SAC 1811CH / SAC 2411CH
EN
EN-13
02/2015
Copyright © 2015, Fast ČR, a.s.
7.4.4 If the air conditioning unit is running in the heating mode (only on models with a heat pump) and
the temperature is set in the range 16-18 °C then the air conditioning unit will continue running
at the set temperature.
7.4.5 If the air conditioning unit is running in the heating mode (only on models with a heat pump) and
the temperature is set in the range 19-25 °C then during the first three hours of the SLEEP 3 mode
the temperature will decrease by 1 °C in each hour. The air conditioning unit will then operate at
a temperature that is 2 °C lower than the initially set temperature.
7.4.6 If the air conditioning unit is running in the heating mode (only on models with a heat pump) and
the temperature is set in the range 26-31 °C then during the first three hours of the SLEEP 3 mode
the temperature will decrease by 1 °C in each hour. The air conditioning unit will then operate at
a temperature that is 3 °C lower than the initially set temperature.
Note
:
If you will not be using the remote control for an extended period of time, remove the batteries.
If the remote control is not working properly, take out the batteries and reinsert them after
some time. When inserting the batteries ensure the correct polarity as shown in the battery
compartment.
TILTING THE HORIZONTAL AIR FLOW DIRECTION ADJUSTMENT FLAPS
If the air conditioning device is in operation then turn it off using the remote control. Manually open
the vertical airflow direction adjustment flap
D
1
so that it is stopped in the top position. To tilt the
horizontal airflow direction adjustment flaps
D
2
hold their ends with your fingers and tilt them to
the left or to the right as necessary. Never adjust the horizontal airflow adjustment flaps
D
2
, if the air
conditioning device is in operation.
D
1
2
1
Vertical airflow direction adjustment flap
2
Horizontal airflow direction adjustment flaps
