43
ProBee-ZE20S Series User Guide Rev.0.1
Digital Input with Button Switch (SW15, Active Low or Active High)
Analog Input with Light Sensor (U7)
Digital Output with LED(CR19) Display (Active High)
Digital Input with Button Switch (SW17, Active Low or Active High)
UART DSR Input
UART
DTR
Output
UART
Data
Input
UART Data Output
UART
CTS
Input
UART
RTS
Output
Digital Output with LED(CR18) Display (Active High)
Digital Input with Button Switch (SW16, Active Low or Active High)
6.3.5 LEDs
(CR)
The development board has 8 LEDs for digital output. To enable the LEDs, the GPIO_OUT (SW?) switch
should be set to LED_ON. The LEDs are turned on when the related GPIO pins of the ZE20S are high.
6.3.6
Button Switches (SW)
The development board has 8 button switches for digital input. The switches can be configured as active
high or active low with the GPIO_IN (SW?) switch.
6.3.7 Variable
Resistors
(VR)
There are two variable resistors for analog inputs on the development board. The analog inputs can be
read with the GPIO_? and GPIO_?. To enable the variable resistors, the ADC_0 and ADC_1 switches
should be placed to VR_? and VR_?.
6.3.8 Temperature
Sensor
The GPIO_? of the ZE20S is routed to the temperature sensor. The relationship between temperature
and analog input is as follows:
Temperature(
°
C) ={ Volt(mV) -600(mV)} * 0.1(
℃
/mV)
6.3.9 Light
Sensor
The GPIO_? of the ZE20S is routed to the light sensor. Approximately, the relationship between
illumination and analog input is as follows:
Illumination(Lux) = Volt(mV) * 0.25(Lux/mV)
Summary of Contents for ProBee-ZE20S Series
