02
TA
2. Push pairing button
Mode3
Mode LED blinks 3 times
every 3 seconds
3. Inquiry and connect to SD1
4.
Connected
Slave Connect LED blinks
every second
4. Connected
Master
2.10. Software and Utility
This configuration software and utility for firmware update is included with the product, which also can
be downloaded from http://www.sena.com
Table 2-8 Configuration Software
Software Purpose
Operating
System
ParaniWIN
Configuration
MS Windows 98SE or Higher
ParaniMultiWizard
Multi Configuration
MS Windows 98SE or Higher
ParaniUpdater
Firmware Update
MS Windows 98SE or Higher
2.11. ParaniWIN
ParaniWIN is a program that runs on Microsoft Windows for the configuration of SD1000U. Install
ParaniWIN on your computer. Plug a SD1000U into the serial port of the computer and turn on the
power. Run ParaniWIN.
Figure 2-1 Serial Port Setting
Set each option properly and click [Confirm]. If the settings of the SD1000U are different from the
ParaniWin, an error message will pop up. If the SD1000U is in the status of connection, warning
message will pop up. Then the current connection can be cancelled by [Disconnect] button on the
main window.
