02
TA
Figure 2-12 Manual Setting Window
In the Manual mode, all settings for the multiple connection mode can be configured in one window. If
a Use field is unchecked or a slave address is entered as 000000000000, it is excluded from the Slave
settings.
The Auto Fill button will load the existing multiple connection mode settings from the Parani-SD/ESD
connected, which can be useful when only some parts of the settings are changed.
If the AT Command Response Disable check box is checked on, the AT command responses such as
OK, ERROR, CONNECT, DISCONNECT are suppressed.
2.13. ParaniUpdater
SD1000U supports firmware updates. You can download new firmware images for the SD1000U at
http://www.sena.com. With the ParaniUpdater, you can update the firmware of SD1000U by selecting
the firmware image file and pushing Start button.
* Note: DO NOT power off SD1000U while the firmware update is progressing, this may damage the
SD1000U.
