27
508.366.1488 | www.semshred.com
5.
Install bed knife bolts with six 3/8”- 16 x 1 1/2" socket head cap screw and six 3/8” thick black washer through
top of clamp – set to hand tight. Flat side of washer should be touching clamp.
6.
Repeat steps 4-6 for the second bed knife.
7.
Wipe off rotor flats and rotor knives before attaching them one at a time with – 9 – 3/8-24 x 3/4" socket head
cap screw.
o
Beveled edge of knife sits in notch of rotor corner.
Figure 7
Figure 6 – Bed Knives as seen from
Drive Plate
Bed Knife
Bed Knife Support
Bed Knife
Bed Knife Support
