B
R E A K T A N K
H
A ND B O O K
06/2015 V4.0
9
The pump is blocked when the water in the tank comes
below this set level. This is to prevent dry running of the
pump.
Lc
Critical low level (alarm message Error 2)
If the level in the tank falls below the set value set, Error 2
will appear on the display.
Lc=0..30cm(5)
C
Correction factor level sensor
With this factor the measured value of the level sensor of
the tank (pressure sensor) can be corrected. Note:
changing this factor influences the operation of the break
tank. Only change in consultation with SEM
Waterbehandeling B.V.
C=0..50% (10)
