B
R E A K T A N K
H
A ND B O O K
06/2015 V4.0
3
The SEM Breaktank can be used for the supplementation of a pool. By default, the SEM break tank is
equipped with a universal level control which can measure 1 level. A float switch is supplied to
measure the level in the skimmer or measuring tube. The lift pump has a capacity of 5 to 45 l / min at
11 to 28 m and is protected against dry running. The capacity of the break tank is about 0.8 m³ / hour
with the built-in mechanical float to fill the tank. Optionally, a solenoid valve is available which
increases the filling capacity to 1.5 m³ / hour.
The SEM Breaktank is supplied as standard with a mechanical float to fill the tank and the capacity
is 0.8m³ / hour. See attachment accessories and parts.
This manual contains all information to commission and maintain a SEM Breaktank.
Because the maximum make-up capacity depends on the connection size of the water pipe and the
required head, there may be differences between the capacities mentioned in this manual and the
capacity in your situation.
Warranty limitation
This documentation is provided by SEM Waterbehandeling B.V. She is in no way liable for damage,
direct or indirect, caused by the use of this documentation.
No guarantee is given for suitability for any special applications and parameter settings. SEM Water
treatment B.V. limited visibility to the replacement of parts or documentation to the extent that the
defects are not caused by improper use. For more information see our general delivery and payment
conditions. The guarantee period on this product is 1 year after the date of purchase.
Document rights
This documentation is the property of SEM Waterbehandeling B.V. located in Veldhoven. No part of
this manual may be reproduced or transferred by means of printing, photocopying, electronic
registration or in any manner whatsoever without the prior written permission of the publisher.