B
R E A K T A N K
H
A ND B O O K
06/2015 V4.0
7
2.2. Service menu
The service menu is opened by the
button press for > 3 seconds. The decimal point on the
right of the display flashes to indicate that the service menu is active. The menu can be followed by a
short press on the
button. The service menu is automatically closed after 10 seconds (except
in menu options L, i1 and i2)
Menuoption
Description
Explanation
Operating weeks
Number of weeks that the pump has been in operation
Operating hours
Number of hours the pump has been in operation.
Parameter ‘B’ and ‘U’ together gives the operating time
of the pump. (1 week = 168 hours)
Serial number print Serial number of the control board
Water level (Level)
The water level in the break tank is shown measured in
millimeters from the bottom of the tank.
In this mode, the setup menu is not automatically reset
after 10 seconds. so that the water level can be
followed while performing service work.
Input level switch 1 The input level of the input is displayed
0 = contact open (float up)
1 = contact closed (float down)
In this mode, the service menu is not automatically
reset after 10 seconds. so that the input signal can be
followed while performing service work.
Input level switch 2 The input level of the input is displayed
0 = contact open (float up)
1 = contact closed (float down)
In this mode, the service menu is not automatically
reset after 10 seconds. so that the input signal can be
followed while performing service work.
Input 2 is for optional extensions and not used with the
standard versions
M
M
b. xxx
u. xxx
S. xxx
L. xxx
I1. x
I2. x
