B
R E A K T A N K
H
A ND B O O K
06/2015 V4.0
8
2.3 Setup menu
The setup menu is opened from the service menu. The service menu can be opened to push the the
button >3 seconds. On the right of the display, the decimal point changes from flashing to
continuous edges to indicate that the setup menu is active. The menu can be followed with the
button. With
and
buttons can be changed values.
The following parameters are adjustable:
The * marked parameters are only applicable in combination with options.
Parameter
Omschrijving
Parameters (factory
setting)
Ta*
Switching delay time of Level switch Input 2
The switch on the input must at least have the time
parameter ‘Ta’ closed to open KLEP2. This is a solenoid
valve connected to output 2.
This parameter is only applicable if the optional solenoid
valve is used.
t=0..60 s (3)
Tb
Switching delay time of Level switch Input 1
This is the switch-on delay time of the level switch that
measures the level of the pool.
The switch at the input must at least have the time
parameter ‘Tb’ closed to start the pump.
t=0..60 s (15)
Tc*
Switch-off delay time of Level switch Input 2
The switch on the input must at least have the time
parameter ‘Tc’ open to close KLEP2.
This parameter is only applicable if the optional solenoid
valve KLEP2 is used.
t=0..60 s (1)
Td
Switch-off delay time of Level switch Input 1
This is the switch-off delay time of the level switch that
measures the level of the pool.
The switch at the input must at least have the time
parameter ‘Tb’ open to switch off the pump.
t=0..0 s(10)
Ha*
Filling valve open level in mm
At this level the filling valve is opened and the tank is
refilled.
This parameter is only applicable if the optional solenoid
valve KLEP1 is used.
Ha=0..30cm (14)
Hb*
Filling valve close level in mm
At this level the solenoid valve closes and filling stops
This parameter is only applicable if the optional solenoid
valve KLEP1 is used.
Hb=0..30cm (17)
Hc
Critical high level (alarm message Error 1)
If the level of the tank exceeds the value set here, Error 1
will appear on the display.
Hc=0..30cm (22)
La
Pump on level (release pump)
The pump is released when the level in the tank is above
this set level. There is enough water in the tank to prevent
dry running.
La=0..30cm (13)
Lb
Pump off level (pump block at low waterlevel)
Lb=0..30cm (8)
M
M
+
M
-
M
