EN
33
2. Information about the motor features
2.1. Designated use
The motor type SE Plus-com must only be used for operating awnings roller shutters.
2.2. Properties
In order to protect the hangings, the drives have a self-programming overload detection in
the upwards direction after the end limit setting has been completed.
Further notes: The obstacle detection of the motors has been developed to protect the sun
protection installation, the insect protection or the obscuration system against damages.
Since, depending on the position of the hangings, when an obstacle is detected, the entire
hanging weight may have to be stopped before the object detection system trips, do not use
the motor’s obstacle detection system for personal protection.
The airborne noise of the motor is significantly below 70 dB (A). Depending on the type of the
roller shutter/awning/screen a strengthening of the sound intensity of the motor is possible.
It can be reduced by use of appropriate measures (e.g. insulation of the box, using noise pro-
tection plugs, etc.).
2.3. SELVE commeo radio
All SELVE-com motors receive radio signals on 868.1 MHz.
commeo is a bidirectional radio system that saves data in the receiver as well as the transmit-
ter. All SELVE commeo transmitters can be programmed into these motors. Up to 16 transmit-
ters can be programmed into one motor. Please adhere to the transmitter operating instruc-
tions. The commeo motors can be set for different applications in the CONFIGURATION
mode. The commeo motor SE Plus-com is already set for ‘awning’.
Note: Ensure that the controls are not installed and operated in the vicinity of metal surfaces
or magnetic fields. Metal surfaces or panes of glass with a metallisation within the transmissi-
on path can reduce the range considerably.
Radio sets transmitting at the same frequency could interfere with reception.
It should be noted that the range of the radio signal is restricted by legislation and construc-
tional measures.
Information about the motor features
