DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 7 / 62
2.2.
PRODUCT CHARACTERIST ICS
The types of products – Venetian Blinds:
Installed on the outside of the building, operated by a electromechanical drive connected with the operating
system,
Installed on the outside of the building, operated manually with a crank mechanism..
The products are characterised by the following qualities:
they are designed for installation in the window area,
they limit the sun light coming into the room,
they provide disperse light in the room
they prevent rooms from overheating, thus contributing to the improvement of thermal comfort in rooms,
they help to limit the costs of air conditioning in the rooms,
they limit the noise transmission to the inside
they do not emit any toxic substances during their work,
emission of noise through a product with electronic drive (connected with work of mechanical parts caused by
electric drive during its work) is not said to be a significant danger and it is a way of comfort, the level of acoustic
pressure is up to 58dB,
the motors have the security level IP44 which means that they are prevented from touching elements movable
and under voltage with tools and wires of >1mm diameter and that they are protected from splashes of water
from any direction,
the construction of the product and driver allows to stop the slats safely at any height within the up-down work
area and stay there suspended.
up and down movement is performed with the use of crank or an electric switch or with a remote controller,
casings for the movable parts were designed and performed in a manner assuring safety for operators as long as
they are used properly.
3.
PRODUCT TRANSPORT AND STORAGE
3.1.
COMPLETENESS AND QUALITATIVE STATE OF DE LIVERY
Selt Sp. z o. o. makes every effort to ensure that the goods are produced in accordance with the order. To check the
completeness of the product is purchaser’s duty and it should be conducted at the time of delivery. Any discrepancies of
the product with the order should be reported immediately to the driver/warehouseman/installers and noted in the proof
of delivery at the risk of losing warranty. Checking the quality of the apparent defects should be done by the purchaser at
the time of delivery. As apparent defects are considered mechanical damages, scratches, cracks, etc. Any discrepancies in
quantity or possible replacements of parts being the evident result of Selt Sp. z o. o. fault, the company agrees to
supplement or replace in the shortest possible time.
3.2.
GENERAL CONDITIONS O F PRODUCT TRNAPORT AND STORAGE
List:
The product is factory-packed in a cardboard box to prevent its damage during storage, transport and during its
transportation to the place of final assembly,
For the transport purposes, the products should be set in accordance with the arrows on the packaging,
Do not store the products in a number of layers greater than 2 due to the possibility of crushing the package
which in turn can lead to permanent damage of the product,
Products placed on the means of transport must be secured against movement and damage during transport (e.g.
spacers, safety belts, etc.),
During transportation the products must be protected from the rain or snow,
Storage places should be dry, airy and protected from the harmful effects of weather conditions (sun,
rain, etc.),
Where the weight of the product exceeds 25kg and its transportation to the place of final assembly
must be carried out by at least two persons.
