DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 10 / 62
3.
Connect the head rail bracket with main cover
panel bracket. Then match them to the cover
panel, adjust to its height and secure tightly.
Img. 1
4.
Fasten the set of brackets along with the cover
panels and side panels (if they occur) to the
wall or niche with an adequate tool.
5.
Tighten the main brackets to the wall/ceiling
Img. 2
6.
Check the level of installed cover panels and
brackets, correct if necessary. Appropriate
leveling of the product is necessary for its
correct functioning.
Img. 3
7.
Loosen the elastic bracket screw, so that the
bracket is easy to open.
8.
Connect the bundle to an installation cable and
open the blind for about 30 cm to facilitate the
installation of the bundle to the cover panel.
Img. 4
