DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 30 / 62
2.
Put the bush on the cable guide (img. 2). Tighten
the screw, first with fingers until a resistance is felt,
then use a flat wrench (img. 3), performing two full
turns. Exceeding this scope results in overtightening
the screw head.
Img. 2
Img. 3
3.
Put the cable guide through opening in the cable
guide bracket and slats.
Img. 4
4.
Put the cable guide bracket in such a position on
the head rail so that the cable does not touch
the edges of opening in the slats and secure it.
Img. 5
