SELMI TANK 200, User And Service Manual

Page: 5 / 53

TANK
1
1. General information
1.1. Structure of the manual
To simplify the reading and understanding of the
information contained in this manual and to make
searches quicker, it has been divided into sections, each
dedicated to a specific subject.
1.2. Messages used
Attention
This type of message is used to draw the reader’s
attention to more delicate or particular procedures
which, if not carried out correctly, may pose a risk
to the safety of the operator and cause damage to
parts of the machine.
Warning
This type of message is used to draw the reader’s
attention to procedures which, if not carried out
correctly or at pre-set intervals, may cause damage
to the machine or its parts, as well as to the product
being processed.
Environment
Messages relating to the environment draw the
operator’s attention to the rules to be followed to
prevent the risk of environmental damages
deriving, directly or indirectly, from use of the
machine.
Note
These messages highlight instructions, advice and
notes that can be particularly helpful during the
various uses of the machine.
1.3. Aim and contents
This manual has been drawn up in consideration of the
requirements of directive 2006/42/EC and paying
particular attention to describing all the procedures
necessary to obtain the best working conditions for the
machine and its operators, without neglecting product
quality:
The aim of this manual is, therefore, to provide the user
with all the information necessary for the correct use and
maintenance of the machine. Consequently it is absolutely
necessary:
- to meticulously follow the instructions given in the
manual during every phase of the machine’s life,
from transportation to demolition;
-
for every machine operator to thoroughly read the
contents of this manual;
-
for the company’s safety officer to make sure that all
machine operators have clearly understood how the
machine works
Attention
In case of doubts on the correct interpretation of
the instructions please contact the manufacturer to
obtain the necessary clarifications. All those
carrying out any kind of operation on the machine
must have thoroughly read and understood the
contents of this instruction manual.
Warning
If this manual is damaged or lost, please ask the
manufacturer or the authorised distributor in the
country where the machine is being used for
another copy.
1.4. Preservation of the manual
The instruction manual is an integral part of the machine
and must be used to train and inform professional figures
operating on the machine. Consequently, it is necessary to
follow certain simple instructions regarding its
preservation, as follows:
-
store the manual in areas protected from humidity and
heat, so as not to jeopardise the quality or legibility of
any part of the publication;
- keep the manual is an easily accessible place known
to the machine operators;
- avoid handling the manual with dirty or greasy hands;
- if you think it is necessary to highlight important steps
of the manual, use non-permanent systems, to
preserve its legibility;
- do not remove, rip or rewrite any parts of the manual
for any reason.