12
13
ENGLISH
MAINTENANCE
The pump fi lter should be cleaned at regular intervals.
To do this, unplug the device from the mains, remove the front of the pump and
clean it under lukewarm water. (Fig 3)
Fig 3
Fig 4
EXCHANGING THE HALOGEN LAMP
(Fig. 4)
Pull the Transformer from the socket and wait until the Halogen lamp cools.
Take the halogen lamp out of the water. Dry the halogen lamp completely before
removing the glass head-piece.
Attention:
Do not touch the bulb with your fi ngers, use a soft cloth.
Pull the defective bulb out of the lamp holder and change it for a new one
(12V G4 / max 10W).
Insert the Halogen light with base in the glass head-piece until it fi ts correctly.
The halogen lamp is now closed completely and can be returned into the water.
TECHNICAL DATA:
Pump
Input:
12V /50 Hz
H maximum: 55cm
Watt:
4
max l/h:
320
Lamp
Input:
12V /50Hz
Watt:
max 10
Transformer
Input:
230V~ /50Hz
Output:
12V /1200mA
Protektion: Protected against overheating and overcharge.
Produced:
DIN EN 60742
SPARE PARTS
Spare bulb 10W, 2er-Set
40131
Spare glass for lamp
40146
Pump with lighting(without transformer)
40382
Transformer
40361
Set of 3 adapters
40377
Switch
40366
ACCESSORIES
Set of 4 colour elements for lamp(red, blue, yellow, green)
40147
ENGLISH
