17
EQUALIZATION - IF NECESSARY
Motorized Skylight Shades use a system that allows easy leveling of the moving
rail. Use a flat head screwdriver or a coin (a quarter works best) to turn the
adjustment screw to raise or lower that side of the moving rail. The adjustment
screws are on the top of the moving rail. One quarter turn of the screw will move
the moving rail up or down approximately
1
⁄
4
”.
Over-turning the adjustment
screw (more than 1” of adjustment) can cause the cord to tangle or wedge
inside the rail. The screw should turn easily - DO NOT FORCE.
If the rail is uneven at the
top, raise the low side with
the outer adjustment screw.
If the stack is uneven at the
bottom, lower the high side
with the inner adjustment
screw.
CHARGING THE BATTERY
Allow the batteries to charge until the light on the charger turns green. A typical
charge cycle can take between 4-6 hours.
Do not leave the charger plugged in for more than 24 hours. This could
prematurely age the battery.
Charging
Port
When the shade begins to operate slower
than normal it is time to charge the battery.
Plug the 8.4v charger into the charging port.
Plug the charger into an electrical outlet.
A red light on the charger indicates that the
battery is charging.