6
The 14 channel remote has the option of turning off
unused channels, making channel selection easier.
Press and hold both UP and DOWN buttons for
3 seconds until 00 Channel displays. Release the
buttons and the 00 will start to flash.
Press the UP or DOWN button to select the required
number of channels (between 1-14).
Press and hold the CHANNEL and RAIL selector
buttons at the same time to confirm selection. The
display will go back to channel 01.
Follow the same process if you need to re-add
channels.
Channel
Display
Stop/Favorite
Down
Channel
Rail
Selector
14 Channel Remote (front)
Up
DISABLING EXCESS CHANNELS
5. Press the
SETTING
button on the motor until the motor starts to beep.
Release the button immediately after the beeps start. The motor will make 4
fast beeps followed by 5 long beeps. Press the
CONFIRM
button on the remote
anytime during the series of long beeps. It must be pressed before the last long
beep. The motor will respond with 3 fast beeps/jogs confirming that the shade
has been linked
6. Close the door over the controls.
7. Repeat steps 1-6 to program the rest of the channels.
