manualshive.com logo in svg

SelectBlinds Skylight, Installation & Care Instructions

Share
Download
SelectBlinds Skylight Installation & Care Instructions Download Page 17

5

This remote control has 14 channels.  Before linking the remote, determine 

which shade(s) you want on which channel.  All shades linked to a remote will 

also automatically be programmed to the “ALL” channel.

The 14 Channel remote may also be used to operate top down-bottom up cellular 

shades.  

You can not mix a standard bottom up only shade and a TD/BU shade 

on the same channel.

Remove plastic film from the front of the 

remote.
Remove screw from the back of the remote and 

slide cover down and off.  Do not replace cover 

until shades have been linked 
If battery is not already installed in the remote 

follow the instructions on page 18.

1. Rotate the door over the contols up.  The door is located at the right end of the 

head rail.
2. Make sure the On/Off switch on the motor is set to “ON”
3. Select the channel that you want to link the shades to, using the 

CHANNEL

 

selector button. The button will scroll through channels in ascending order only.  

The remote will go back to channel 1 after channel AL.  See next page to disable 

unused channels.
4. Confirm that the channel selected is set for bottom up only 

shades by looking to see if a number 1, 2 or 3 shows in the left 

of the display.  If a number is shown, deactivate the Top Down/

Bottom Up function for that channel by pressing the  

RAIL 

SELECTOR 

and 

DOWN

 buttons at the same time until the rail 

selector number disappears from the left side of the screen.
.

Important:

 

Please read through this section completely before beginning.

01

11

Setting

Button

On/Off 

Switch

Up = On

Down = Off

  STEP 4: LINK REMOTE

CR2450

Channel 

Display

Stop/Favorite

Down

Channel

Rail 

Selector

Front

Confirm

Limit

Back (cover on)

Up

Back (cover off)

Jog on/off switch

Screw

Cover 

slides 

off

Summary of Contents for Skylight
































Reviews:

No comments

Brands by name

Popular brands

Load more brands