3
End Plug
Side
Foot
T-Hook
The installation brackets are always mounted so that the inner
surfaces face each other.
Brackets must be in line and level. Shim brackets on inside
mounts if necessary. The head rail must be level for the shade
to operate properly.
SHADES WITH FASCIA OR NO HEAD RAIL
Inside Mount
Minimum 1
1
⁄
2
” surface
Outside Mount
Minimum 1
1
⁄
2
” surface
1
1
⁄
2
”
INSIDE MOUNT
A deduction has been made on your inside mount shade
to make sure that there is enough clearance to fit inside the
window opening. In most cases the brackets will need to be
placed approximately
1
⁄
16
” in from the window casing. Make
sure that the brackets are placed so that the shade is securely
engaged with the tabs on the brackets.
OUTSIDE MOUNT
Outside mount brackets should be installed so that the
measurement from the outside of the left bracket to the outside
of the right bracket is the ordered shade width plus
3
⁄
16
”
Make sure the brackets are level and aligned.
Attach each bracket using two screws.
EXTENSION BRACKETS (OPTIONAL)
Optional extension roller brackets are used to provide
additional clearance.
Mount in the same manner as above.
SIDE MOUNT/EXACT (OPTIONAL)
Use this method only if shade was ordered as a side mount/
exact.
Side Mount
Control Side
T-Hook
End Plug
Side
Control Side
1
⁄
16
”
1
⁄
16
”
