18
9. Fit Rotors
Note: Its best to complete this step after initial flight tests to ensure everything is working as it should
before fitting the rotors to the motors.
Detailed in the product overview area of this manual is an instruction covering how to recognise the
different rotors. The Rotor nuts on the motor are both normal and revers threaded to stop the force of
the motor from accidentally loosening the nut.
To fit Remove the nut, place the rotor that corresponds with the CW (clockwise) or CCW (counter-
clockwise) direction of the motor.
Refit the Rotor nut and slightly tighten with spanner or shifter.
Note
: a nut from a CW motor will not fit a CCW motor.
RED tape indicates
front direction
Note: Rotors on opposite sides of the Hexacopter rotate
in the opposite direction for stability. Check the
inscription on the motor for direction
Rotor A
Rotor B
Assembly and Installation
