11
This is an 8 channel transmitting remote control physically configured to what is described the Mode 2 layout, which means
the Throttle stick is fitted to the left side without spring to return stick the middle position. As part of Mode 2 the Elevator &
Aileron switch is fitted with a spring to return the stick to the center position which allows the Hexacopter to return to level
flight after forward, backward, left or right movement.
Parts of the Controller for FPV Configuration
CHANNEL- 5/6
SW2 (3 Position switch)
-Manual
-GPS loiter / assist
-GPS Return to land
CHANNEL- 8
Gimbal tilt control
Aileron Trimmer
On/Off Power Switch
No Function
Loop point for a lanyard
Elevator Trimmer
Elevator & Aileron stick
CHANNEL- 1
Aileron
˂ ˃
movement
CHANNEL- 2
Elevator
˄ ˅
movement
Antenna
(transmitter
2.4Ghz)
Power indicator
light and speaker
CHANNEL- 5/6
SW1 (3 Position switch)
-Manual
-Manual
-Direction lock
*Conditions apply
Throttle Trimmer
CHANNEL- 7
Gimbal roll control
Throttle & Rudder stick
CHANNEL- 3
Rudder
˂ ˃
movement
CHANNEL- 4
Throttle
˄ ˅
movement
Rudder Trimmer
Binding Button
Mode 1
Mode2
D/R
7” LCD Screen
Screen Mounting bracket
Antenna (receiver 5.8Ghz)
Battery Tray
(User optional fitting)
JST Power connecter for fitting
a rechargeable2S battery
Battery 3S type with
yellow XT60 plug
Screen Mounting bracket
Audio Video cables for video
connection for optional video in/Out
Power Adaptor Cable (some
models) allows battery with XT60
power connecter to fit to DEANS
typs power connector
Product Overview: Parts of the Controller
