MANUAL DE INSTRUCCIONES CODIGO 80098 REV E May/2017 (Sujetas a modificaciones sin previo aviso) Pag.: 11
J
.P. SELECTA s.a.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
5. Equipment Description
DRY-BIG
ovens are used in sample thermal treatments, for its desiccation, cured
and sterilization. Especially when samples can be treated by fan assisted circulation.
Fan assisted circulation gets a great temperature uniformity and a quick temperature
rise.
The temperature controller includes the following functions:
- Temperature selection up to 250ºC in increments of 1ºC.
- Timeout selection, after which the oven will start.
- Operating time selection, after which the oven will stop.
The oven’s remote control from a PC allows temperature profiles creation, data re
-
cording and control panel lock, by means of a RS-232 serial interface communication
and a temperature recording in a USB pen-drive.
6. Installation
Unpack the equipment and visually check that the contents are in good conditions.
Keep the package for some days.
6.1 Location
Place the equipment on a flat level stable surface, suitable for the equipment weight.
To work in a comfortable way, please leave a free space of 50cm around the equipment
and a minimum of 20cm at the rear part.
6.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the con-
nection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency co
-
rresponds to the one indicated in the equipment characteristics plate. Also, check
that motor turns on the indicated way.
7. Operation
Unpack the equipment and visually check that the contents are in good conditions.
Keep the package for some days.
7.1 Introduction
DRY-BIG
basic operation is very simple: select the operating temperature (See 7.2)
and press the «START» key.
The oven will start and a few minutes later, the inner temperature will be stabilized
at the operating temperature.
To get the most out of the oven, it will be interesting you know all its additional features:
- Adding a timeout to the starting and an operating time.
- Adjusting the temperature measure in a precise way.
- Recording temperature readings in a USB pen-drive.
- Controlling the oven from a PC via a RS-232 serial.
ATTENTION
Burning risk
Take proper precautions
(use of thermal gloves, clamps,...)
to extract samples from the inside
the oven.
It can be at a high temperature.
¡ATENCIÓN!
:
t
hree
phAse
power
supply
.
1.
ensure
thAt
the
device
is
rAted
At
mAin
power
supply
.
2.
c
heck
motor
fAn
turning
wAy
.
if
not
mAtch
the
indicAted
wAy
swAp
two
phAses
.
