58
6-7. Hardware Setting Function
The following settings can be made in the Hardware Setting screen.
•
User calibration of measured value
•
Adjust touch panel display position
•
Returning to Factory settings (default settings)
•
Editing user information
1) Hardware Setting Screen
1. Hold down the Menu button
7
and press
the Power button
10
to enter the Hardware
Setting screen.
2. Touch the desired menu item.
a. User Calibration
This meter has been calibrated to Sekonic
standards. However, it provides the ability
to match exposure measurements with
meters to meters, correct exposure for
special requirements, etc. in 1/10 step
increments in a +/-1.0EV.
b. Adjust Touch Panel
This enables to adjust the position of
touch panel display.
c. Factory Setting
All parameters and settings are initialized
and set to factory default setting.
Custom setting will be set to default
setting, and customized Filter, frame rates
and shutter angles will be deleted.
d. Edit User Information
Up to 31 characters can be entered to
personalize the meter to distinguish
from other meters, or to input contact
information in case of loss.
This user information is displayed in the
Information screen
3. Press the Power button
10
to turn OFF the
power.
Menu button
7
Power button
10
Hardware Setting Screen