Paragraph 8 - Password
Programming Operation
-
-
-
Password
Password
****
0000
PROG
+
-
By entering the password, you can enter the programming
menu and see all the set values. The password will be
requested whenever you seek to modify them.
The flashing line indicates the number than can be modified.
Use the
key to select the number (from 1 to 9), and the
key to select the number to be modified. Confirm by
pressing the
key. By setting “0000” (default), the
password is eliminated.
Paragraph 9 – Flow Alarm
Programming Operation
-
-
Alarms
Alarms
Alarm Flow
Alarm Flow
Alarm Flow - On
Flow Off
Flow Off
Off
On
Signals 6
PROG
+
+
-
-
-
-
ESC
-
This makes it possible to activate (deactivate) the flow
sensor.
When activated (On), press the
key to access the
request for the number of signals that the pump waits for
before an alarm is triggered. The number flashes when you
press the
key, and you can then use the
keys
to set the value. Confirm by pressing the
key. Press
to return to the main menu
Paragraph 10 – Level Alarm
Programming Operation
-
-
Alarm Level
Alarm Flow
Alarms
Level Stop
Alarms
Level Alarm
Stop
Alarm
PROG
-
-
ESC
-
This makes it possible to set the pump when the level
sensor alarm is activated. In other words you can decide
whether to stop dosage (Stop) or simply activate the alarm
signal without stopping dosage.
Changes can be made by pressing the
key, then using
the
keys to set the alarm type. Confirm by pressing
the
key. Press
to return to the main menu
Paragraph 11 – Flow Display Unit
Programming Operation
-
-
Unit
Unit
Unit
Standard
Standard <-
L/h
PROG
-
+
-
-
This makes it possible to set the dosage unit of
measurement on the display.
Changes can be made by pressing the
key, then using
the
keys to set the unit of measurement, choosing
between L/h (litres/hour), Gph (Gallons/hour), ml/m
(millilitres/minute) or standard (% or frequency, depending
on settings). Press
to confirm and return to the main
menu
EM00136063 rev.
1.0
7