GIW01MR001SE 033173 270919
5
USER PARAMETERS SETTINGS
In order to access the settings of the programmable thermostat, proceed as follows:
1.
Push the button ‘
‘; the display shows main menu.
2.
Press the button ‘ ‘ or ‘ ‘ to scroll the user parameters:
Date/Time
(only visible if the device is not connected to Wi-Fi)
Brightness
Languages
Program
(only visible if the regulation mode is set to manual permanent or manual temporary)
Sound
Advanced
Infoservice
3.
Push the button ‘
‘ to enter ‘edit’ mode of the selected parameter.
4. Configure the data related to each parameter, as shown in the following.
5.
In order to exit the programming of the user parameters, select the option ‘EXIT’ or push the key ‘ ‘ or
wait 15 seconds without pushing any
button.
Date / Time
In order to set the clock of the programmable thermostat, perform the following operations:
1.
Push the button ‘
‘ on the programmable thermostat to access the user parameters menu.
2.
Through the keys ‘ ‘ and ‘ ‘ select the parameter Date/Time and push the key ‘
‘.
3.
Through the keys ‘ ‘ and ‘ ‘ select the parameter ‘Date’ and push the key ‘
‘.
4.
Set the date with the keys ‘ ‘ and ‘ ‘; push the key ‘
‘ to confirm the set data and move to the next one.
5.
After setting the year, push the key ‘
‘ to go back to the upper menu.
6.
Through the keys ‘ ‘ and ‘ ‘ select the parameter ‘Time’ and push the key ‘
‘.
7.
Set the time with the keys ‘ ‘ and ‘ ‘; push the key ‘
‘ to confirm the set data and move to the next one.
8.
After setting the seconds, push the key ‘
‘ to go back to the upper menu.
9.
Through the keys ‘ ‘ and ‘ ‘select the option ‘EXIT’ or push the key ‘ ‘ or
wait 15 seconds without pushing any button.
ATTENTION
- The menu ‘Date/Time’ is visible only if the device IS NOT paired with the App Seitron Smart.
- The Wi-Fi connection automatically sets date and time.
Brightness
Through this parameter it is possible to set the brightness of the display on two levels and turn on/off the white LEDs which are located on the four
corners of the display.
1.
Push the button ‘
‘; the display shows the menu.
2.
Select the menu ‘Brightness’ and push the button ‘
‘.
3.
Select with the keys ‘ ‘ and/or ‘ ‘ one parameter among:
- ‘On’
(that is when the wi-time is being operated; the display brightness is settable inside the range 10 .. 100).
- ‘Standby’ (that is when the wi-time is not being operated; the display brightness is settable inside the range 0 .. 100).
- ‘Backlight’ (parameter related to the 4 white LEDs located on the corner of the display).
4. Confirm with ‘ ‘.
5.
About the parameters ‘On’ and ‘Standby’: set the brightness with keys ‘ ‘ and ‘ ‘; push the key ‘
‘ to confirm the set data.
6.
About the parameter ‘Backlight’, through the keys ‘ ‘ and ‘ ‘ choose ‘yes’ (key ‘
‘) or ‘no’ (key
‘
‘) to turn on/off the LEDs.
7.
To exit the menu, select the option ‘EXIT’ or push the key ‘ ‘ or
wait 15 seconds without pushing any button.
Languages
With this parameter is possible to set the language of the programmable thermostat.
1.
Push the button ‘
‘; the display shows the menu.
2.
On the menu ‘Languages’, push the button ‘
‘.
3.
Select with the keys ‘ ‘ and/or ‘ ‘ which language it is needed to set; push the button ‘
‘ to confirm the choice.
4.
To exit the menu, select the option ‘EXIT’ or push the key ‘ ‘ or
wait 15 seconds without pushing any button.
Program
This parameter is visible only if the room temperature is regulated in “Manual temporary” or “Manual permanent” mode.
It allows the programmable thermostat to resume the room temperature regulation according to the weekly program set via the App.
In order to resume the time programming, proceed as follow:
1.
Push the button ‘
‘; the display shows the menu.
2.
On the parameter ‘Program’, push the button ‘
‘.
3.
The display shows the writing “Disable manual mode?”
4.
With the keys ‘ ‘ and ‘
‘ it is possible to select one of the two options which appear on the display ‘Yes’ or ‘No’.
5. In order to complete the procedure, choose ‘Yes’ confirming with the key ‘ ‘; the display shows the confirmation of the setting, so the wi-time
