Seiko FB 390, User Manual

Page: 22 / 50

17
LF/FF:
Decrease the top of form by 1/60 inch. You can decrease the margin to a
maximum of -10 (-10/60 inch) from the default setting.
Press the
ONLINE
key to exit and save your new setting. The
POWER LED
and
ONLINE LED
blink simultaneously 3 times with a beep, and then the
POWER LED
will be on.
Tear-off Adjustment Mode
There is a tear-off bar at the edge of the window cover. When you have finished printing, you
can advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily
tear off the perforated sheets. The tear-off setting determines the distance between the
perforation of tractor paper and the tear-off bar. If the default distance is not suitable for you, you
can adjust it by the printer’s tear-off adjustment feature.
With the printer online, press both the PARK/LOAD and LF/FF keys for about 3 seconds to get the
printer to enter the tear-off adjustment mode. When the printer enters this mode, the
ONLINE
LED
and the
POWER LED
blink alternately.
Use the
PARK/LOAD
and
LF/FF
keys to alter the tear-off setting:
PARK/LOAD:
Press the
PARK/LOAD
key to adjust the distance in 1/60 inch increments. You
can maximum increase to +15/60 inch
LF/FF:
Press the
LF/FF
key to adjust the distance in 1/60 inch decrements. You can
maximum decrease to -15/60 inch
To exit and save your new setting, press
ONLINE
key. The
POWER LED
and the
ONLINE LED
blink simultaneously for 3 times, then the
POWER LED
turns on. Your new tear-off setting value is
saved.
Using the Setup Menu System
The factory settings of this printer are selected to meet the requirements of the majority of users.
However, you may want to use a different character set for a different language or you may prefer
printing in different font or style. To achieve this, you can use the Setup Menu System to create
your own printer settings by modifying or changing the factory defaults.
The Setup Menu System is divided into several groups, and each group contains a number of
NOTE
To exit without saving, just turn off the printer.
NOTE
To exit without saving, just turn the printer OFF.