Segway PT i2, Reference Manual

Page: 148 / 160

136
System Faults
If the Segway PT detects a hardware fault, the icons shown in
Table 19 will appear on the InfoKey Controller.
The Segway PT cannot be used until the fault is cleared. To attempt
clear system faults, follow the instructions in the Recommended
Action column of
Table 19 .
Table 19. Icons for System Faults
Display Icon Description Recommended Action
There is a fault
in the
Powerbase or
Batteries.
1.
Power on the Segway PT.
2.
If the same icon appears,
confirm that both Li-ion
Batteries are installed
correctly.
3.
If the same icon appears
remove and reseat both
Batteries (see
“Removing
the Batteries” on page
100
and
“Reattaching the
Batteries” on page 102
).
4.
If the same icon appears, plug
in your Segway PT and verify
that both Battery Charge
Indicator lights are green. Plug
in and charge the Segway PT
overnight.