123
EnglishEnglish
Segway PT Will Not Enter Balance Mode
Your Segway PT will not enter Balance Mode.
Recommended Action:
Ensure that you have properly followed all instructions in
“Understanding Balance Mode”
and
“Riding Your Segway PT”
in
the Getting Started Manual.
1.
Confirm power has been turned on.
2.
Confirm the LeanSteer Frame/Handlebar Assembly is centered
and the Powerbase is level. (If you are positioned across a gentle
slope, the LeanSteer Frame/Handlebar Assembly must be
vertical side-to-side).
3.
Confirm there is no weight on the Mats.
4.
Check that the center Balance Indicator light is green and all four
other Balance Indicator lights are not illuminated.
5.
Tap the Mat with your foot without stepping on, then remove your
foot. Confirm that all five Balance Indicator lights are pulsing
green, and a smiling face icon shows in the InfoKey Controller
display.
6.
If the Segway PT still will not enter Balance Mode, identify the
error icon on the InfoKey Controller, and attempt to clear the fault
following the recommended actions in
Summary of Contents for PT i2
