Sega Racing Classic, Owner'S Manual

Page: 96 / 166

87
TROUBLESHOOTING
16
Press the DVD DRIVE switch. The DVD DRIVE tray comes out. Set the DVD from the DVD software kit
into the tray. Always have the DVD label side facing upward.
17
Press the DVD DRIVE switch and the tray returns to its original position. Software installs automatically
from the DVD.
18
When installation is finished, the initialization operation will be performed automatically.
19
If other cabinets are connected for network play, configure network play using GAME TEST MODE.
Otherwise the cabinet will operate independently.
20
Press the DVD DRIVE switch to have the tray come out, and then remove the DVD.
21
Press the DVD DRIVE switch to have the tray return. When the power is cut off the tray will not move.
22
Turn off the power switch of the cabinet.
23
Disconnect the 2 connectors on the wires used for installation from the DVD DRIVE.
24
Attach DVD DRIVE case lid and fasten it with 1 thumbscrew.
25
Recline the seat back.
26
Disconnect the 2 connectors on the wires used for installation from RINGWIDE.
27
Insert connector 14P which was disconnected from RINGWIDE.
28
Close the seat and return it to its original position.
29
Store the DVD DRIVE, USB wire for installation, and DVD software kit in a location free from dust and
cigarette smoke.
18