Sega Racing Classic, Owner'S Manual

Page: 62 / 166

53
CONTROL PANEL (STEERING WHEEL MECHANISM)
11
CONTROL PANEL (STEERING WHEEL MECHANISM)
● When working with the product, be sure to turn the power off. Working with
the power on may cause an electric shock or short circuit. However, the unit
must be switched on when using TEST MODE. Do not touch any part of the unit
except those areas indicated.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
● This work should be performed by the site maintenance individual or other
skilled professional. Performing work with non-technical personnel can cause
electric shock.
● The motor parts may be hot immediately after a game has been completed, so
allow some time to pass before beginning work on the parts.
● Carefully read the “Usage Precautions” that come with the grease used in
periodic maintenance work and make sure that you understand them. Improper
use can lead to accidents.
After adjusting or replacing the volume, always go to the DRIVE BD TEST or INPUT
TEST screen in GAME TEST MODE and set the mobility value.
● Do not touch the steering wheel when switching on the unit. The steering wheel
undergoes automatic initialization after the unit is switched on. Touching the
steering wheel could lead to injuries.
● When removing or attaching the door, be careful that your hands or fingers do
not get caught in anything.
11