Sega Racing Classic, Owner'S Manual

Page: 15 / 166

6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2-2 OPERATION AREA
● For safe operation, use and operate this product in an area measuring at least
1.63 m (64.2 in) in width and 2.52 m (99.2 in) in depth. The area prescribed in
this manual is absolutely necessary, for if one should fall over and hit their head
against something, there could be a serious accident.
● Be sure to provide sufficient space specified in this manual. Do not allow objects
to block the ventilation ports. It can cause generation of heat and a fire.
● SEGA shall not be held responsible for damage or compensation for damage to
a third party, resulting from the failure to observe this instruction.
● For the sake of safety and workability, the ceiling where this product is installed
must be at least 2.4 m (94.5 in) high. If the ceiling is not at least 2.4 m (94.5 in)
high, exercise due caution to avoid hitting the ceiling and lights.
● The entryway for this product should be 1.02 m (40.2 in) wide and 1.97 m (77.6 in)
high. This product is separated into its main units when shipped. They contain
moving parts, so avoid tilting them as much as possible. Tilting the units could
result in damage or deformation to the parts, or misalignment of the parts, and
malfunction may occur.
● If the machine does not fit through the entryway to the installation location, do
not disassemble it indiscriminately. Do not disassemble the machine in any way.
There could be electric shock, damage to parts, or faulty operation. Request work
from the office indicated in this manual or the point-of-purchase, or inquires for
details.
2
2.52 m (99.2 in)
Air vent 0.2 m (7.9 in)
1.62 m (63.8 in) 0.7 m (27.6 in)
0.15 m (5.9 in)
1.63 m
(64.2 in)
1.02 m
(40.2 in)
0.7 m (27.6 in) or more