Sega Racing Classic, Owner'S Manual

Page: 24 / 166

15
ASSEMBLY AND INSTALLATION
● Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
● Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
● Ensure that connectors are properly connected. Improper connections can
cause electric shock.
● This work should be carried out by the site maintenance personnel or other
qualified professionals. Work performed by non-technical personnel can cause
a severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation. If no one with proper technological expertise is available, request
service from the office indicated in this document or the point-of-purchase so as
to ensure safety.
● Provide sufficient space so that assembling can be performed. Performing work
in places with narrow space or low ceiling may cause an accident and assembly
work to be difficult.
● To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
● When inserting or removing a connector, always hold it by its main part. If
you hold it by anything else while doing so, the connections between wire and
connector terminal fixtures could be damaged; and there could be a short circuit
or fire.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
● When connecting wires inside the cabinet, there may be instances in which the
indoor lighting does not reach that location. Have a flashlight or other auxiliary
lighting equipment on hand. If wires are connected carelessly, there could be an
accidental short circuit, fire, etc.
● Do not leave power cable or earth lines exposed over passageways. Exposure
could lead to damage, electric shock or short circuit. Wherever wiring has been
laid out on a floor surface, use a wiring protection cover.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause
an electric shock.
6
ASSEMBLY AND INSTALLATION
6