Sega Luigi's Mansion Arcade, Owner'S Service Manual

Page: 98 / 214

84
CONTROL
UNIT
10
9
While holding the centre harness in place, take the tie from step 7 and, by trying to move it left and right as
illustrated below, confirm that it is firmly in place.
10
While holding the centre harness in place, take the tie from step 7 and, by trying to move it left
and right as illustrated below, confirm that it is firmly in place.
11
Attach the second cable tie next to the one attached in step 7. Attach tightly similarly to the first tie.
12
After attaching, cut off the excess length from the tie.
13
Wrap the piece of tarp around the controller cable at the base of the Poltergust controller. Wrap it with
the short end (8 cm) oriented vertically, and the long end (12 cm) horizontally.
NOTE: If the tie is movable, tighten it further.
NOTE: This process can be made simpler if one person wraps the tarp while another person holds the cable in place.
Check that the tie does not move
The second tie The tie attached in Step 8