Sega Luigi's Mansion Arcade, Owner'S Service Manual

Page: 89 / 214

CONTROL
UNIT
75
10
NOTE: All of the internal controller parts are attached to the controller cover (L). Do not remove the controller cover
(L) screws until disassembly.
For more caution details about the vibration motor assembly's placement, refer to “10-6 Replacing the Vibration
Motor.”
NOTE: The solenoid spring shaft, plunger cushion, and Strobulb trigger lower pressure coil spring are held in place
between the controller cover (L/R). Be careful not to lose any small parts when disassembling.
5
Set down the Poltergust controller as illustrated below. Remove the screws (8) and spring washers (8) and
remove the controller cover.
6
When replacing the unit, follow the Steps in reverse order, taking care that the harness and vibration motor
assembly do not become caught, and checking the position of the screws..