Sega Luigi's Mansion Arcade, Owner'S Service Manual

Page: 31 / 214

ASSEMBL
Y AND
INST
ALLA
TION
17
6
6 ASSEMBLY AND INSTALLATION
• Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
• Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
• When assembling, be sure to use additional help from another person(s).
Depending on the assembly work, there are some cases in which working by
one person alone can cause personal injury or parts damage.
• Adhere strictly to all of the work procedures stipulated in this document. If two
or more workers are working at the same time, exercise special caution. If
sequences are carried out erroneously, accidents can result. There might also
be cases in which the assembly cannot be completed.
• Pay special attention to the surroundings when a multiple number of workers
are working at the same time. There is always the danger that a worker might
be injured. In assembly and installation of this product, there are procedures in
which a stepladder is used, procedures in which heavy objects are attached,
and procedures involving connection of a rated power supply of 10 amperes.
Carelessness in doing work could lead to grave injuries and even fatalities.
• Ensure that connectors are accurately connected. Incomplete connections
can cause electric shock.
• This work should be carried out by the site maintenance personnel or other
qualified professionals. Work performed by nontechnical personnel can cause
a severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation. If no one with proper technological expertise is available, request
service from the office indicated in this document or the point of purchase so
as to ensure safety.
• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of fire.
• Do not leave power cable or earth lines exposed over passageways. Exposure
could lead to damage, electric shock or short circuit. Wherever wiring
has been laid out on a floor surface, use a wiring protection cover. [Wiring
diameter: Power cable, approx. 10 mm – 14 mm]
• Persons who connect indoor power supplies must be qualified electricians.
Do not allow anyone without proper qualifications to make such connections.
Otherwise there could be electric shock.
• Provide power cables for connecting the indoor power supply to the product.
The rating of the power cable must be at least 15 amperes. The cable must
conform to this requirement and also be of sufficient length to enable the
indoor power supply to be connected to the product without difficulty. Use of a
cable that does not meet the requirements can result in a fire or electric shock.