52
TEST MODE
12
●
Screen display
RESET UNIT: Reset the reader/writer
CHECK CARD: Check a card
CHECK PRINTER: Check the card printer
CHECK STOCKER: Check the card stocker
CLEAN ROLLER: Clean the card delivery roller
CLEAN STOCKER: Clean the card stocker roller
ERASE PRINT: Erase the printing created with the
CHECK PRINTER
UNIT STATUS: ---:
Check reader/writer operations
UNIT RESULT: ---:
The results of reader/writer operations
●
RESET UNIT
Choose this option to reset (reinitialize) the reader/writ-
er unit. UNIT STATUS will display “INITIALIZING,”
followed by “DONE,” indicating the reset is complete.
12-3-8 IC CARD R/W & PRINTER TEST
Select IC CARD R/W & PRINTER TEST to display the following screen.
12-3-8 FIG. 01
●
Be sure to test the operation of the card reader/writer regularly.
●
Previous printing may remain on the surface of the card after printing new text or images.
This does not affect the data stored on the card.
●
CHECK CARD
Choose this option and UNIT STATUS will display “INSERT THE CARD REQUIRES CHECKING”. Insert the card
you wish to check. UNIT RESULT will display one of the following depending on the results of the check.
NEW CARD:
The card is new
DEADLINE CARD:
The card is expired
NORMAL:
The card is normal and has no problems
INTERRUPTED CARD:
The card was interrupted while writing
UNKNOWN CARD:
The card status is unknown
DELETE CARD:
The card is used up
BROKEN CARD:
The card is broken
UNKNOWN ID:
The ID is unknown
UNKNOWN VERSION:
The version is unknown
When the check is complete, UNIT STATUS displays “EJECTED. REMOVE THE CARD”. Remove the card.
●
CHECK PRINTER
Choose this option and UNIT STATUS will display “INSERT THE DISPOSABLE CARD”.
Insert a card. UNIT STATUS will display “MAKING IMAGE (WAIT MOMENTS ...)” and the printer will begin print-
ing to the card. Printing is complete when UNIT STATUS displays “EJECTED. REMOVE THE CARD”.
Remove the card and check the printing.
NOTE: This only tests the printer. It does not affect card data.
●
CHECK STOCKER
Choose this option and UNIT STATUS will display “DRAWING OUT2”. The stocker will dispense a card.
If the card exits properly through the dispenser slot, UNIT STATUS will display “EJECTED. REMOVE THE CARD
AND PLACE BACK INTO STOCK”.
NOTE: This tests the stocker. It does not affect card data. If the card is new, return it to the stocker.
IC CARD R/W & PRINTER TEST
RESET
UNIT
CHECK
CARD
CHECK
PRINTER
CHECK
STOCKER
CLEAN
ROLLER
CLEAN
STOCKER
ERASE
―
> EXIT
UNIT STATUS : ---
UNIT RESULT : ---
SENSOR(PT1)
:
OFF
SENSOR(PT3)
:
OFF
SENSOR(PT4)
:
OFF
SENSOR(PT5)
:
OFF
SENSOR(PT6)
:
OFF
SENSOR(DISPENSER)
:
OFF
SENSOR(SHUTTER1)
:
OFF
SENSOR(SHUTTER2)
:
OFF
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
Summary of Contents for Initial D4
Page 1: ......
