49
TEST MODE
12
STEER ADJUSTMENTS
Make adjustments to STEERING. Press the TEST Button to display the following screen.
Center the STEERING. When the “0” displayed is not
exactly aligned with the “^” mark above CENTER, use
the cursor to select RIGHT or LEFT and move the “0”
until it is displayed directly above the “^” mark.
Move the cursor to RIGHT and press the TEST Button
to move the “0” to the right. Each time you press the
TEST Button, “0” moves slightly to the right.
Move the cursor to LEFT and press the TEST Button to
move the “0” to the left. Each time you press the TEST
Button, “0” moves slightly to the left.
Move the cursor to EXIT and press the TEST Button to
return to the INPUT ASSIGNMENTS Screen.
12-3-5 FIG. 02
STEER
ADJUSTMENTS
(MIN -40 : MAX 40 )
STEERING =
***
O
^
CENTER
RIGHT
LEFT
―
> EXIT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
GAS ADJUSTMENTS
Make adjustments to GAS.
Press the TEST Button to display the following screen.
12-3-5 FIG. 03
Set the MAX position by stepping on the GAS pedal.
The “MAX” display moves to the right depending on
how hard the pedal is pressed.
Entering GAS ADJUSTMENTS without having the
GAS pedal pressed down automatically sets the MIN
position.
NOTE: If you enter GAS ADJUSTMENTS with the
GAS pedal pressed down, set the MIN position
by releasing the GAS pedal. The “ MIN” dis-
play moves to the left depending on how much
the pedal is released.
Move the cursor to RESET and press the TEST But-
ton to reset MAX and MIN.
Move the cursor to EXIT and press the TEST Button
to return to the INPUT ASSIGNMENTS Screen.
GAS
ADJUSTMENTS
(MIN **H : MAX ** H)
GAS = **H
MAX
v
0
^
MIN
RESET
―
> EXIT
FIRST, STEP ON THE GAS PEDAL FULLY, AND RELEASE IT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
Summary of Contents for Initial D4
Page 1: ......
