14
ASSEMBLY AND INSTALLATION
6
●
The software is not installed on the game board (LINDBERGH) when the power supply is engaged, so the “Error 22”
message is not a malfunction. However, if there is another error display, or if there is no video output at all, there
might have been an error in product assembly, wiring connections might be faulty, or the LINDBERGH might not
be functioning properly.
●
After the power supply is engaged, wait for “Error 22” message to be displayed. If the product is indiscriminately
operated in any way beforehand, there could be unexpected problems or malfunctions, as well as damage to
parts.
●
Once “Error 22” is displayed, set the DVD-ROM in the DVD DRIVE and re-engage the power supply. Installation
takes place.
●
After the power supply is engaged, the DVD DRIVE tray will not come out for about 30 seconds even if you press
the switch. This is due to DVD DRIVE initialization.
●
The DVD DRIVE tray can come out or return only while the power supply is engaged. The tray cannot be opened
or closed while the power is off.
●
Even after the software has been installed, store the DVD software kit, DVD DRIVE and DVD wire in a secure loca-
tion.
●
If for any reason installation cannot be completed, an error is displayed. Refer to the LINDBERGH service manual
and take corrective action.
Install the software in the LINDBERGH cabinet.
For safety and to prevent erroneous operation, connect the DVD drive and the LINDBERGH before connecting the power cord.
Have the DVD drive, DVD wire, and DVD software kit ready.
1
Connect the DVD wire to the connector on the rear of the DVD
drive. Connect the 2 connectors on the side with the DVD tag.
Con
fi
rm that the main switch of the AC unit is set to OFF.
6-2 FIG. 01
USB MINI B
NH6 Pin
2
Open back door. Connect the DVD wire to the
LINDBERG. Connect the NH6 pin to the connec-
tors on the side with the “LINDBERGH” tag. You
can connect the USB MINI A connector to any open
port, but port 1 will be used for purposes of this
document. Then turn main power switch on.
6-2 FIG. 07
NH6 PIN
USB MINI A CONNECTOR
Summary of Contents for Initial D4
Page 1: ......
