Sega House of the Dead, Operator'S Manual

Page: 45 / 59

12.TROUBLESHOOTING
Should trouble occur, first check connector connections.
PROBLEMS CAUSE COUNTERMEASURES
With Main SW ON,
no activation
Power is not
supplied.
Power
Supply/Voltage is
not correct.
AC Main fuse
causes the power to
be cut off due to
momentary
overload.
Plug in correctly.
Make sure that power
supply/voltage is correct.
Check fuse. Remove the
cause of overload and
replace fuse.
The Monitor
screen always
sways or shrinks.
The power supply
voltage is not
correct.
AC current has too
much load.
1.> Ensure that the power
supply voltage is correct.
2.> Connect unit to AC
Brkt with ehough
available current
No sound is
emitted.
Sound volume
adjustment is not
appropriate.
Sound BD and
speaker are
malfunctioning.
Adjust sound volume. (see
section 6)
Perform sound test to find
and replace defective
parts. (see section 6)
Controller
operation is not
satisfactory.
Due to
environmental
changes, etc.,
sighting became
inappropriate.
Micro switch
malfunctioning.
Sensor BD
malfunctioning
Perform sighting
adjustment in the TEST
MODE. (see section 6)
Replace the micro switch.
(see section 7)
Replace the Sensor BD.
(see section 7)
The Fluorescent
lamp does not light
up.
The Fluorescent
tube is burnt out. Replace the Fluorescent
tube. (see section 10)