Sega House of the Dead, Operator'S Manual

Page: 13 / 59

[3.] ASSEMBLY CHECK
In the TEST MODE, ensure that the assembly has been made correctly and IC BD is satisfactory (refer to
Section 6). In the test mode, perform the following test:
Selecting the MEMORY TEST on the test mode menu screen
causes the on-board memory to be tested automatically. The game
board is satisfactory if the display beside each IC No. shows
GOOD.
Selecting the INPUT TEST on the test mode menu screen causes
the screen (on which each switch is tested) to be displayed. Press
each switch. For the coin switch test, insert a coin from the coin
inlet with the coin chute door being open. If the display beside
each switch indicates "ON," the switch and wiring connections are
satisfactory.
Select "OUTPUT TEST" from the Test Menu in the Test Mode to
have the Lamp Test Screen displayed. Check if each lamp lights
up satisfactorily.