Sega House of the Dead, Operator'S Manual

Page: 30 / 59

6 - 11 GUN SETTING
Selecting GUN SETTING causes the following screen at the top to appear. This allows the
controller sighting to be adjusted. Periodically check the sighting adjustment status on this
screen.
The screen shown at the left is the sighting adjustment menu mode.
Press the SERVICE BUTTON to bring the arrow to the desired
adjustment item to select. Press the TEST BUTTON to cause the
following sighting check to appear. There are 2 types of adjustments,
i.e., one for 1 P side and one for 2P side. Adjustments for both 1 P
and 2P can not be made on the same screen. To return to the Main
Menu bring the arrow to EXIT and press TEST BUTTON. (Fig. 6.2)
Selecting GUN MARK causes the screen at the left
to appear. Point the controller at this screen to have
an impact mark appear on the screen. The position
of the mark shows the impact point shot by the
controller. A red impact mark applies to the left 1P
side and a blue impact mark applies to the right 2P
side. Perform the TEST BUTTON to return to the
above sighting adjustment menu screen.
Selecting PLAYER 1 GUN ADJUSTMENT
causes the screen shown at the left to be
displayed. 1P side sighting adjustment menu
returns to the screen without performing anything.
Adjustment procedure: First shoot at the center of
grid (the square mark at the upper left portion of
the screen). This causes another grid to appear at
the lower right portion of the screen. Shoot at this
grid also.